Wednesday, September 10, 2014

CARD# HPJ-2014-46: Rock On

I made another Telecaster! 


The card measures 4.25" x 5.5".



I had to make a music-themed card for an order and came up with this. I was inspired by the layout of this simple and pretty card I found in Pinterest. It was created by Diana Nguyen. You can check out her blog here. 


I was thinking of not using dimension tape because the card is supposed to be sent abroad meaning it should be light and kind of flat. But then again, it would not feel the same. The look would be different without dimensions. Since the card is already thick due to the additional sheets for the message inside, I thought it wouldn't matter. I've tried sending cards with heavier embellishments to the US before and I didn't have any problems. The lady in the post office only asked me what was inside the envelope because there was an obvious bump. When I told her it was a card, she didn't ask any more questions.

I guess the people here are not that used to handmade cards being sent here and there compared to other countries. I don't think they also know about mail art. I won't discuss it in detail here, but one time I had to put mine inside another envelope, a standard one, to be able to post it. Hmf. I wish people are more aware of papercrafts so they would understand.

Ugh. I have strayed from the topic again. Let's go back to the music-themed card. So I was saying it had to be simple. Not bulky. I used dimension tape for the board paper, but I didn't use any for the telecaster. 

Now about the telecaster... you have gathered that this is not the first time that I used a 'telecaster' on a card from what I said at the start of this post. I actually made one for Telet's birthday three years ago. Hers was red.


The one I made for today's card is slightly different. I didn't draw the details. I punched holes, scored the paper and added tiny pearls instead. I made it neat.


The telecaster was the only embellishment I used. The patterned paper that was peeking out from the slash of ivory board paper acts as an accent. I wrote the sentiment with a fine tech pen.


Inside the card, I affixed a piece of patterned paper (another music sheet). I added a pocket for the extra sheets for the messages. At first I thought of just adding a strip of paper (like a band), but when the customer said she needed 10 sheets, I changed it to a pocket. The stack of paper, though thinner than the board paper I used for the base, would not fit into the band. Thus, the pocket.



I rounded the corners of the cardstock and inked the edges. I stamped several images on the sheets so as not to appear too bare. For the first page, I stamped a banner and handwrote a sentiment. It was a continuation of the sentiment at the front of the card.


I made a lining for the envelope to match the card.




That was that. Another simple card made. I hope to finally start my holiday cards and boxes soon. Thanks for stopping by. Have a wonderful day!


MATERIALS AND TOOLS USED: Bevania Splendorgel 270gsm and 160gsm board paper, Bo Bunny 6x6 paper pad Etc, Rives Tradition Black Board Paper, kraft paper, Tim Holtz Paper Stash French Industrial Revolution, Graphic 45 8x8 paper pad Couture Collection Lovely, pearls, ColorBox Cat's Eye Pigment Ink Antique Pewter, Ranger Archival Ink Jet black Dong-A Fine-TECH Black 0.3, Inkadinkado Clear Stamps Inspirational Lift, Kaisercraft Clear Stamps Bundle of Joy, Bo Bunny Clear Stamps Madame Boutique, Bo Bunny Clear Stamps Flourishes and Such, Fiskars Twist and Flip 2-in-1 Corner Rounder Punch, ticket punch, regular hole puncher, Martha Stewart Scoring Board


Tuesday, September 02, 2014

CARD# HPJ-2014-45: Thank You 2

A simple thank you card.

This measures 4.5" x 5.75".

Since this was to be sent abroad, the card should not be bulky. The design should be simple and clean. The giver wanted summer colors to be incorporated in the design. There should be a butterfly somewhere as well as blueberries.

I thought of using white board paper for this. The whiteness of the base and the minimal embellishment would give the card a striking simplicity.

I adhered a sheet of yellow patterned paper onto the front of the card. I used a die to cut out an image on another piece of white cardstock and then layered it onto the patterned paper. The cutout would now show the yellow paper. It would have looked better if it was adhered onto the base with foam tape, but the additional dimension would make the whole thing bulky. I had to forgo the tape.


For the blueberries, I punched little circles on a scrap of blue patterned paper (from the Kaisercraft Forget-Me-Not Collection) using a regular one-hole puncher. I took the dots out from the small compartment of the puncher and doodled the crowns.


I stamped three small butterflies onto the main card and stamped another set on a separate cardstock. I fussy cut the images, folded them vertically and adhered them onto the stamped images on the card. I affixed a couple of tiny crystals around the butterflies for added effect. And oh I stamped the sentiment as well, but I used black ink instead of the colored ones.


I just placed a sheet of vanilla paper inside and left it blank for the message.


Also, the giver wanted an envelope to go with it. She need not asked. I almost always include an envelope with the ordered card except for the ones that needed boxes.

The envelopes that I have in my stash are store-bought, but I personalize them by adding a lining. I used a piece of paper from one of my wrapping paper books for this particular project.


That was that. It was a simple yet pretty card. I hope to work on another wonderful project soon. Thank you for stopping by. Have a wonderful day!

MATERIALS AND TOOLS USED: Bevania Splendorgel White Board Paper, My Mind's Eye Six By Six Away We Go, Kaisercraft Forget-Me-Not Collection, Biotop Colors Vanilla, ColorBox Cat's Eye Pigment Ink Turquoise, Olive and Pink, Ranger Archival Ink Jet Black, Bo Bunny Clear Stamps You're Invited and Flourishes and Such, crystals, Dong-A Fine Tech 0.2 Black, Spellbinders Shapeabilities D-Lites Sprigs, Cuttlebug Machine V2

Friday, August 29, 2014

CARD# HPJ-2014-44: Journey

I was asked to make a farewell card for a friend, something that would have a lot of space for messages. A few months back, I came upon a video tutorial by Graphic 45 Design Team member Arlene Cuevas on how to make a card with a box while I was looking for videos on mixed media art. Apparently, I did not check the whole  video until last month. It was rather a nice project and perfect for Christmas. I stored the idea away for the holiday season. When I received the request to make the farewell card, I immediately thought about the video. You can find the tutorial here. If you are interested to see the wonderful projects of Arlene, you can check out her blog Butterfly Kisses here.

The card with box creation of Arlene Cuevas.
The original length of the card was 81/2". It was rather too long in my perspective so I had it shortened to 7. I probably should have cut it an inch more, but I have already started working on it before the idea struck me.








 At first I thought of using blue and black, but as I measured and cut along the cardstock that was to be the base for the card with a box, I was drawn to the idea that I should leave the blue papers alone and use black, ivory, brown...something steampunky. Thank goodness I was able to get my hands on a set of Inkadinkado clear stamps a few months ago. I used the hot air balloon stamp to make the main embellishment. I will save the blue papers for another card.





I made a tag out of a square of patterned paper and then adhered it onto a piece of black board paper. I used a stencil and black ink pad to make the dots and placed the layered tag onto the card with foam tape.


I took two wooden wings from my newest loots and affixed them onto the tag behind both sides of the balloon. If only I had more paper tapes, those that would fit the theme, I would have added them on the upper rightmost part of the tag. Since I did not have them, I made use of my black self-adhesive crystals.


I added more embellishments--paper flowers, metal charm, jump rings, alpha tiles and label plate. I stamped the sentiment onto a scrap of paper and inked the edges.


The inside of the card looks like this. I did not add any decorations on the left panel so that the map of Spain (where the recipient will go) would not be covered.



I thought of punching a semicircle at the bottom of the box to enable the easy pulling out of the cards for the messages, but it wasn't possible. The circle punch that I have does not fit. I should have punched it out before I built the box up.



As an alternative, I tied a length of jute twine around the cards. Now they could easily be pulled out at one go!


This is what the cards inside the box look like. I stamped images on scraps of patterned paper, fussy cut them and adhered them onto the cards with foam tape. I inked the edges as well.

It was so much fun making this card. I hope to make another vintage-inspired card soon. Thank you for stopping by. Have a wonderful day!


MATERIALS AND TOOLS USED: Rives Black Board Paper Tradition, Bevania Splendorgel Ivory Board Paper, Graphic 45 8x8 paper pad Typography Inscribe and Couture Accessorize, Tim Holtz Paper Stash 12x12 French Industrial Revolution, Eno Greeting Wood Embellishments and Label Plate, jump rings, Graphic 45 Staples Collection Flowers, brad, Papemelroti alpha tiles and cutout, book page, self-adhesive crystals, bead, metal charms, twill ribbon, jute twine, elastic band, ColorBox Cat's Eye Pigment Ink Pad Black, Beauty Premium Ink Pad Black, Ranger Archival Ink Jet Black, The Crafter's Workshop Stencil Mini Punchinella, Inkadinkado Clear Stamps Inspirational Lift, Spellbinders Nestabilities Labels Thirty-Five, Cuttlebug Machine V2


Monday, August 25, 2014

CARD# HPJ-2014-43: Love Story

It took me some time to complete this card, but I am happy with the result. I have to warn you though of the number of photos I added on the post. The card is a zfold. There are several panels I had to decorate so there were a couple of parts that I had to photograph.



The card measures 5" x 6.25" when closed.


I made use of their anniversary date as an embellishment.


One of my high school friends had asked me a few months back to make a card for her boyfriend for their seventh anniversary. Wow. Seven years. I didn't even know that she was in a relationship for that long. I wish them many more years together.


What she wanted was to incorporate her message into the design of the card. She told me at that time that she will be writing a poem. I already pictured out the poem on a nice die cut in front of the card. But when she finally gave the details last week, I was surprised to find that the poem she mentioned was 20 verses long with four lines each. Whoa. What now? That definitely chucks the old idea. I searched my mind for some ideas as to the fold and layout I could use to accommodate the message as well as three photos and came upon zfold. I modified the measurements by making the flaps the same size.

I was left thinking on how to divide the poem and the photos. I have decided beforehand to take out the last two verses for the fourth panel at the back. It was fitting because those two verses contained the anniversary greeting. That last panel was like the end part of the message.


On the other hand, she said that her boyfriend is a simple guy so a simple card would do. When asked about any particular color or colors she named black and white. I wanted to know if vintage was alright and it was. Thinking along the line of simple, I decided against employing a variety of embellishments and just focusing on the words and the patterned papers.




As I have mentioned above, the original idea was to print the poem on a cardstock and cut it with a die to decorate the front of the card. Since it was no longer feasible with the whole poem, I thought of using the same idea for the title. The card was vintage-themed so I used vintage fonts. I looked for free fonts online. You will find the fonts' names and the links where I got them below.
1. Bergamot Ornaments
2. Thirsty Script
3. Carnivalee Freakshow
4. Coventry Garden
5. Old Retro Labels

I used Special Elite for the verses.



As you can see, the verses are long and they would not fit into the pockets nicely. What I did was divide them into two--one having five lines and the other four lines--I punched holes on them to be able to join the two parts with jute twine. For that, the bottom cardstock could be folded to the back of the top cardstock. They no longer peek out from the top.


I inked the edges to maintain the vintage look.


I blurred parts of the photos of the couple (using an online photo editor) so you won't see all of them well. I actually edited the colors using the available filters at Befunky. I can't remember the exact number, but I mostly used Tintype.


Using my forefinger, I applied gesso around the edges of the photo. Again, the embellishments need to be minimal. I only added a tag with a handwritten sentiment on it and two self-adhesive crystals.

 Here is the view of the last panel. It is the one at the back of Panel 3 which contained the boyfriend's photo and the 'Happy Anniversary' sentiment.




I adhered a red patterned paper to complement the other elements of the final panel. I can't say the last two verses, but they summed up the giver's sentiments and love for her special someone. Thus, the red and the hearts.


This is what the back looks like when spread out. 



I made a bag out of wax paper that would fit the card and closed it with a length of twine. I went to the bus terminal to meet my friend who was to arrive from our province. We chatted for some time while waiting for the person who will pick her up to appear. She checked the card out and loved it. I am glad she liked it.

That was that. I hope to make more projects that would hold so much meaning for the receivers that they would treasure them always.

Thank you for stopping by. Have a wonderful day!

MATERIALS AND TOOLS USED: Orange A3 Poster Paper, Rives Black Board Paper Tradition, Bevania Splendorgel Ivory Board Paper, kraft paper, Graphic 45 Typography and Couture Collections, Downloaded Fonts,Printed Photos Edited Using befunky.com, Eno Greeting Wood Embellishments and Label Plate, self-adhesive pearls and crystals, jute twine, ColorBox Cat's Eye Pigment Ink Pad Antique Pewter, Uni-ball Signo Broad White Pigment Ink Pen, Marie's Gesso, hole punch, HP Deskjet Printer, Spellbinders Nestabilities Labels Thirty-Five, Shapeabilities Fancy Framed Tags One, Cuttlebug Machine V2